Skip to product information
1 of 7

GKU Upgraded Dash Cam Hardwire Kit with 8pcs Fuse Tap Set, 3-Meter Type-C ACC Hard Wire Kit, 12V-24V to 5V/2.5A Wiring Kit with Low Voltage Protection, 24H Parking Surveillance for all GKU Dashcams

21 total reviews

Regular price
$21.99
Regular price
Sale price
$21.99

GKU Type - C Dash Cam Hardwire Kit - gkutech
GKU Upgraded Dash Cam Hardwire Kit with 8pcs Fuse Tap Set, 3-Meter Type-C ACC Hard Wire Kit, 12V-24V to 5V/2.5A Wiring Kit with Low Voltage Protection, 24H Parking Surveillance for all GKU Dashcams

$21.99

  • Description
  • Product Reviews

Professional Installation Recommended ⚡: Installation requires connection to your vehicle’s fuse box. Electrical systems vary by model, so to ensure safety and avoid potential electrical issues, professional installation is strongly recommended.✅

Click to View the Instruction ManualUser Manual

How to Install GKU Dash Cam Hardwire Kit?

Power up Your GKU Type-C Dash Cam: Connect your dash cam or other device with 3-meter Type-C Hardwire Kit for stable 5V/2.5A output and wide 12V-24V input range. Designed for GKU Dash Cams (Series D200/D600/D600Pro/D700/D900/D1000/E200/D600ProMax). Not compatible for other brand devices.

Full Pakcage:  The Upgraded Dashcam Hard Wiring Kit with Type C Plug Includes 4 types of Add-A-Circuit Fuse with Fuse Holder-2*Low-Profile Mini, 2*Mini, 2*ATO (Regular) and 2*Micro2, suitable for almost all cars.

 

24-Hour Surveillance: With GKU Hardwire Kit's continuous power supply from your car battery or fuse box, enjoy round-the-clock monitoring even when your car is off.

Ultimate Safety Features: Our Hardwire Kit has low voltage protection that shuts off power if voltage falls below 11.8V (+/- 0.2). Overheating, overcurrent and short-circuit protection add to the safety.

Effortless Installation: Say goodbye to cigarette lighters and messy cables! Our Type-C Hardwire Kit is easy to install with a hidden cable that can be permanently installed. Installation Tip: Connect the red wire to ACC, yellow wire to BATT, and black wire to GND (any metal part of the vehicle).

Customer Satisfaction Guar-anteed: We offer a one-year warranty on our Hardwire Kit for quality issues, providing exceptional customer service and peace of mind.

 

 FQA:

Q1: How can I verify if my GKU Dash Cam has successfully entered Parking Mode?

A1: If the hardwire kit is installed correctly, the “Parking Mode” option will appear in the GKU GO App.

Q2: My dash cam doesn’t enter Parking Mode. What should I check?

A2: This usually happens because the hardwire kit is not properly connected or Parking Mode is not enabled in the app.

Steps to resolve:

  1. Open the GKU GO App and check that Parking Mode is enabled.
  2. Ensure the yellow wire (BAT+) is connected to a constant power fuse.
  3. Reconnect the car battery if needed.
  4. Turn the ignition to ACC/ON: the dash cam should power on automatically (red wire active).
  5. Turn off the engine while keeping the vehicle in ACC mode: the dash cam should switch to Parking Mode (yellow wire active).

Q3: After turning off the engine, the dash cam stays on. Why?

A3: The red and yellow wires may be swapped.

Solution:

  • Red wire → Connect to an ACC/ignition-switched fuse (powers on/off with ignition).
  • Yellow wire → Connect to a constant power fuse.

Q4: The hardwire kit isn’t powering my dash cam. What should I check?

A4: Please verify the following:

Wiring:

  • Red wire: ACC/ignition-switched fuse (e.g., radio, non-heated seats).
  • Yellow wire: Constant 12V fuse (e.g., door locks, OBD port).
  • Black wire: Ground to a clean, bare metal surface (scrape off paint if necessary).

Battery voltage:

  • If your car battery voltage is consistently below 12V, the kit may not activate.
  • In this case, charge or replace the battery before using Parking Mode.

 

Customer Reviews

Based on 21 reviews
86%
(18)
5%
(1)
10%
(2)
0%
(0)
0%
(0)
R
Ryan Pearce
Good with D600 vameray

Bought for my D600 front and rear dashcam. Easy to install and is essential for using the parking mode feature and just good for hiding wires. Decent quality cables with a good length to reach the main camera.

C
CJ
Works well with d600 pro dashcams

Instructions are very limited but with aid of a few youtube tutorials it's pretty easy to install, you'll need a multimeter or pen type electrical tester to determine which spare fuse slot provides power whilst engine as off and another while engine is on, if you touch the metal point on a fuse with the tester you can quickly determine this, and then you just connect the relevant a cables and works like a charm. I've only tested the kit with gku d600 pro front and rear cameras and I've had no problems. I fitted to a cupra leon hybrid and can confirm it doesn't interfere with any of the electrics

S
Shabba
Work great

Works fine...fuse bypass are a little tight to get in (I used micro type) but it all works fine.. length was just enough to run thru car to top of windscreen (Hyundai Tucson).. getting it work was causing problems...emailed sellers and they answered very quickly with diagram for my specific car... highly recommend item and seller

C
Chrisb
Good but overpriced

Did the job

S
Simon Kentfield
Perfect product

Easy installation,

You may also like